Warman Slurry Pumps

Item #

6015

Slurry Pump, Warman, 1-1/2-1M, Cast Iron /Rubber.

5238

Slurry Pump, Warman, 1-1/2-1M, Cast Iron / Rubber.

Warren Slurry Pumps

W5059-02

Warren, Model: 3102, 16x14x22, all 316SS, 19 3/4" 5 vane IMP, 11,500 GPM @ 128' TDH, S/N 82020, Used.

W5059-03

Warren, Model: 3102, 16x14x22, all 316SS, 19" 5 vane IMP, 12,500 GPM @ 107' TDH, S/N 82021, Used.

W5059

Slurry Pump, Warren, 747-A10, 316SS, 6.5" IMP,RPM, Used.

W5060

Slurry Pump, Warren, 747-A, 316SS, 6-3/8"IMP,.

W5061

Slurry Pump, Warren, 5-SOD-15, Cast Iron, 750, 70 TDH, 1150 RPM, Used.

W5063-07

Warren 3202, 6x4x13, serial # 10228P, GPM: 900 @ 60' TDH, 1180 RPM, 12 1/2" imp., pump only, good used.

W5063-08

Warren 4 PH 15, cast iron x bronz trim, 14 3/8" imp., GPM: 420 @ 193' TDH, 1800 RPM, w/ motor, 50 HP @ 1800 RPM,, 230/460 Volt, Good used.

W5063-09

Warren 4 PH 15, cast iron x bronz trim, n/a imp., GPM: 530 @ 173' TDH, 1800 RPM, w/ motor, 50 HP @ 1800 RPM,, 230/460 Volt, Good used.

W5063-10

TSP Pump

1) Warren, thick stock pump, mdl: 11HD MK1, SN RH6-0606-SS, Rebuilt unit, from shaft side: Right hand discharge, Good Rebuilt. (out side in yard).

Warren Fan & Thick Stock (we also stock Warren PL & PH series pumps)

5062

Fan Pump, Warren, Mdl: 14-DBL-20H, 6000GPM @ 165TDH, 1200 RPM, All Stainless Steel (2 available)

5063-01

Thick Stock Pump, Warren, Mdl: 11HD MK11, 1 used,unused, call for details. (2 available)

5063-02

Fan Pump. Warren, Model:4200 - 24-DLB 32, Cast iron x Stainless steel wetted parts, new unit,

5063-03

Warren, Size: 4 PH-15, Cast Iron x Bronze Trim, used Item.

5063-04

Warren, Size: 4 PH-15, Cast Iron x Bronze Trim, used Item.

5063-05

Warren, Size: 8-DTB-19A, GPM: 2500, TDH: 270 ft., 1750 RPM, Cast Iron / Bronze trim, used.

5063-06

Warren, Size: 5-DTB-17, GPM: 900, TDH: 60 ft., Cast Iron / Bronze trim, used.

New and Used Pump Parts

Our extensive database contains hundreds of pump parts, including many hard-to-find items too extensive to list. If you are in need

of any the following parts, please contact our sales department at the number below. We out source new and used replacements

for: Goulds, Allis Chalmers, Worthington, Durco, I/R, Nash, and many other current and late models. Including: Shafts, Impellers, Casings,

Bearings, Frames Seal Chambers etc... (ALSO: AFTER MARKET PARTS AVAILABLE UPON REQUEST).